Cloth Diapers & Parenting Community - DiaperSwappers.com

Cloth Diapers & Parenting Community - DiaperSwappers.com (http://www.diaperswappers.com/forum/index.php)
-   Diaper Chatter and Q & A (http://www.diaperswappers.com/forum/forumdisplay.php?f=10)
-   -   How to reseal PUL??? (http://www.diaperswappers.com/forum/showthread.php?t=18962)

clothdiapermom 07-01-2006 10:08 AM

How to reseal PUL???
 
Some of my Fuzzi Bunz the PUL on the shiny inside has like cracks in it that go with the fabric if that makes sense. Is there a way to re seal that?? I have tried just putting them in the dryer to reseal them and didn't help. These aren't that old less than one year of use it is happening up where all the female end of the snaps are as well as on the triangular part where the male ends are. Is it possible to cause this from having them too tight??? My dd is really skinny and we have to put them on the tightest waist setting for her and she doesn't ever have red marks, but I am afraid it is gonna cause leaks :confused:

Please advise what I should do.

kissum 07-01-2006 10:11 AM

Re: How to reseal PUL???
 
You can iron them, carefully. I did that once with a hole and it worked really well to close it.

clothdiapermom 07-01-2006 10:14 AM

Re: How to reseal PUL???
 
Quote:

Originally Posted by kissum
You can iron them, carefully. I did that once with a hole and it worked really well to close it.

Which side do you iron? What temperature, I need directions. :giggle:

kissum 07-01-2006 10:25 AM

Re: How to reseal PUL???
 
I would put it inside out and iron the inside. Hot enough to seal, but not hot enough to melt. You can try a towel over it if you're afraid of burning a hole. I honestly don't remember what temp I used. Thinking back, that was pretty brave of me!

Sherry 07-01-2006 02:37 PM

Re: How to reseal PUL???
 
if you iron the inside, use freezer paper between the puland the iron. :)

Sweet_Fantasy_Fox 07-01-2006 05:43 PM

Re: How to reseal PUL???
 
what is freezer paper?


All times are GMT -6. The time now is 02:02 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vB.Sponsors